NEC SL1000 Features And Specifications Manual page 202

SL1000/SL1100
Operation
To use Dial Number Preview to place a call (Multiline Terminal only) (When set PRG
15-02-60:0)
1. Do not lift the handset or press Speaker key.
2. To preview any number, press
With the VRS key installed, you must dial
To preview a Speed Dial - System/Group number, press the Left Cursor key and dial the Speed
Dial - System/Group bin number you want to call.
The number is displayed.
D
3. To dial out the displayed trunk number, press a Line/Trunk Group key.
If the previewed number as a trunk access code (e.g., 9), you can press Speaker key instead.
- OR -
To dial an Intercom number, press Speaker key.
- OR -
To cancel the number without dialing it out, press Hold key.
To use Dial Number Preview to place a call by Directory Dialing (Multiline Terminal
only) (When set PRG 15-02-60: 1 or 2)
1. Do not lift the handset or press Speaker key.
2. To preview any number, press
- OR -
To preview a Speed Dial - System/Group number,
1.
Press Down Cursor key and press 1
2. Press Up Cursor key or Down Cursor key to select the destination name.
3. Press Enter Cursor key to confirm a name and number.
The number and name is displayed.
3. To dial out the displayed trunk number, press a Line/Trunk Group key.
If the previewed number as a trunk access code (e.g.,9), you can press Speaker key instead.
- OR -
To dial an Intercom number, press Speaker key.
- OR -
To cancel the number without dialing it out, press Hold key.
1-192
* key and dial the number you wish to call.
* to preview the number.
* key and dial the number you wish to call.
st
character you want to search.
ISSUE 2.0
Dialing Number Preview