NEC SL1000 Features And Specifications Manual page 563

ISSUE 2.0
Program Num-
ber
14-02-02 Analog Trunk Data Setup - Ring Detect Type
14-04-01 Behind PBX Setup
21-04-01 Toll Restriction Class for Extensions
21-05-12 Toll Restriction Class - PBX Call Restriction
21-06-08 Toll Restriction Table Data Setup - PBX Access Code
Operation
To place a call over a PBX trunk:
1. At Multiline Terminal, press Speaker key and dial 804.
- OR -
At Single Line Terminal, lift the handset and dial 804.
2. Dial PBX trunk group number (01 ~ 25).
3. Dial PBX access code and number.
- OR -
1. At the Multiline Terminal only, press the PBX trunk group key (PRG 15-07 or SC 852:
group).
2. Dial PBX access code and number.
- OR -
1. At the Multiline Terminal, press Speaker key and dial 9.
- OR -
At the Single Line Terminal, lift the handset and dial 9.
2. Dial the PBX access code and number.
- OR -
1. At the Multiline Terminal, press Speaker key.
- OR -
At the Single Line Terminal, lift the handset.
2. Dial #0.
3. Dial the PBX trunk number (e.g., 05 for line 5).
4. Dial the PBX access code and number.
- OR -
1. Press the PBX trunk key (PRG 15-07-01 or SC 852:
2. Dial the PBX access code and number.
In all cases above, Toll Restriction may prevent your call.
Features and Specifications Manual
Program Name
SL1000/SL1100
Default
0
0
2
0
Table 1 ~ 4 = No Setting
*
01 + trunk #).
P
* 02 +
1-553