NEC SL1000 Features And Specifications Manual page 692

SL1000/SL1100
Program
Number
20-07-11
20-11-11
20-11-14
20-11-21
24-02-07
24-02-10
T
25-07-07
25-07-08
81-01-03
Method D - Tandem Trunking to Speed Dial Number
Program Num-
ber
11-10-06
11-10-07
11-10-08
13-04-01
13-04-02
13-04-03
13-04-04
13-04-05
14-01-04
14-01-05
14-01-13
20-06-01
20-07-05
20-07-11
1-682
Program Name
Class of Service Options (Administrator Level) - Forced
Trunk Disconnect (analog trunk only)
Class of Service Options (Hold/Transfer Service) - Au-
tomatic On-Hook Transfer
Class of Service Options (Hold/Transfer Service) -
Trunk-to-Trunk Transfer Restriction
Class of Service Options (Hold/Transfer Service) - Re-
striction for Tandem Trunking on Hang Up
System Options for Transfer - Trunk-to-Trunk Transfer
Release Warning Tone
System Options for Transfer - Disconnect Trunk-to-
Trunk
System Timers for VRS/DISA - Long Conversation
Warning Tone Time
System Timers for VRS/DISA - Long Conversation Dis-
connect Time
COT Initial Data Setup - Clear Signal (Open Loop) De-
tection Time
Program Name
Service Code Setup (for System Administrator)
- Setting the Automatic Transfer for Each Trunk
Line
Service Code Setup (for System Administrator)
- Canceling the Automatic Transfer for Each
Trunk Line
Service Code Setup (for System Administrator)
- Setting the Destination for Automatic Trunk
Transfer
Speed Dialing Number and Name - Speed Dial-
ing Data
Speed Dialing Number and Name - Name
Speed Dialing Number and Name - Transfer
Mode
Speed Dialing Number and Name - Transfer
Destination Number
Speed Dialing Number and Name - Incoming
Ring Pattern
Basic Trunk Data Setup - Transmit Gain Level
for Conference and Transfer Calls
Basic Trunk Data Setup - Receive Gain Level for
Conference and Transfer Calls
Basic Trunk Data Setup - Trunk-to-Trunk Trans-
fer
Class of Service for Extensions
Class of Service Options (Administrator Level) -
Set/Cancel Automatic Trunk-to-Trunk Transfer
Class of Service Options (Administrator Level) -
Forced Trunk Disconnect (analog trunk only)
COS 01~15 = 1
COS 01~15 = 1
COS 01~15 = 0
COS 01~15 = 0
1800 (seconds)
0 (seconds)
30 (seconds)
15 (seconds)
59 (295ms)
833
834
835
not assigned
not assigned
0
not assigned
0
32 (0dB)
16 (-8dB)
0
All extension port = Class 1
COS 01~15 = 1
COS 01~15 = 1
Tandem Trunking (Unsupervised Conference)
ISSUE 2.0
Default
Default