NEC SL1000 Features And Specifications Manual page 765

ISSUE 2.0
2. After the system answers, dial the DISA password (normally 000000).
You hear dial tone.
3. Dial 716 and the VRS password.
4. Dial the function you want.
7 = Record
5 = Listen
3 = Erase
5. Dial the message number (001~100), record the message and press # to end recording.
If you dialed 7 to record, you can dial # to listen to the message you just recorded.
If you dialed 5 to listen, you can dial 5 and the message number to hear it again or if you want to
Record, listen to or erase another message, go back to step 4.
General Message
To listen to the General Message:
Multiline Terminal Only
Your Message Waiting LED flashes when there is a new General Message. A voice message
periodically reminds you.
1. Do not lift the handset or press Speaker key.
2. Dial 711.
You hear the General Message.
Normally, your Message Waiting LED goes out. If it continues to flash, you have unanswered
Message Waiting requests or new messages in your Voice Mail mailbox.
To record, listen to or erase the General Message:
1. Press Speaker key or lift the handset.
- OR -
At Single Line Terminal, lift the handset.
2. Dial 712.
3. Dial the function you want.
7 = Record
5 = Listen
3 = Erase
If you dialed 7 to record, dial # to end the recording.
If you dialed 5 to listen, you can dial 5 to listen to the message again.
To Record the General Message again, go back to step 1.
If you dialed 3 to erase the General Message, you must go to step 4 (hang up). To cancel without
erasing on a Multiline Terminal, press Hold key instead and go back to step 1.
4. Hang up when you are done.
Features and Specifications Manual
SL1000/SL1100
V
1-755