Caller Id - Flexible Ringing - NEC SL1000 Features And Specifications Manual

SL1000/SL1100
Description
The Caller ID - Flexible Ringing feature provides several different options for rerouting calls based on
the Caller ID received.
Reject/Reroute "Private" Caller ID Calls
When an analog trunk call is received with "Private" Caller ID information, the SL1000/SL1100 can
reject the call by playing a VRS message or it can route the call to an alternative extension or
C
incoming ring group programmed in PRG 22-18-01.
Reject/Reroute Based on Entry in SPD Table
When an analog, ISDN or IP trunk call is received with regular Caller ID information, the SL1000/
SL1100 can reject the call by playing a VRS message if the Caller ID number matches the Speed Dial
group number programmed in PRG 22-16-01 and Speed Dial entry in PRG 13-02-01 and PRG
13-04-01. The analog, ISDN or IP trunk call can also be routed to an alternative extension or incoming
ring group if the Caller ID number matches the common or group Speed Dial table (PRG 13-04).
This option can block calls on all trunks or it can be set on a per-trunk basis.
Programming Examples for Flexible Ringing by Caller ID:
• To refuse the "Private" Caller ID incoming call:
PRG 14-01-27: 1 (reject)
PRG 20-07-24: 1 (Enable for COS)
PRG 22-18-01: 0 (no transfer)
PRG 40-10-06: 2 (VRS message 2)
then,
Turn on the Private Call Refuse mode using the service code (PRG 11-10-32) or Programmable
Function Key (code 86).
• To transfer the "Private" Caller ID incoming call to extension 301 as ring pattern 2:
PRG 14-01-27: 1 (reject)
PRG 22-18-01: 1 (extension number)
PRG 22-18-02: 301 (extension 301)
PRG 22-18-03: 2 (ring pattern 2)
then,
Turn on the Private Call Refuse mode using the service code (PRG 11-10-32) or Programmable
Function Key (code 86).
• To transfer the "Private" Caller ID incoming call to incoming ring group 2 as ring pattern 3:
PRG 14-01-27: 1 (reject)
PRG 22-18-01: 2 (incoming ring group)
PRG 22-18-02: 2 (group 2)
PRG 22-18-03: 3 (ring pattern 3)
then,
Turn on the Private Call Refuse mode using the service code (PRG 11-10-32) or Programmable
Function Key (code 86).
1-114

Caller ID - Flexible Ringing

ISSUE 2.0
Caller ID - Flexible Ringing