NEC SL1000 Features And Specifications Manual page 592

SL1000/SL1100
• During the Firmware Upgrade, the Package file is copied to the Flash Memory on the CPU directly.
For the Flash Memory size limitation before extracting new version of Firmware old version has
deleted. The system then resets and boots up. If the boot up fails when switching to the new
version, system may lock up. In this case it requires use Compact Flash card and copy new
Firmware to Flash Memory on the CPU manually.
Default Settings
At default, both PCPro and WebPro are set to Update Immediately after the upload.
System Availability
R
Terminals
None
Required Component(s)
PCPro
Related Features
PC Programming
Guide to Feature Programming
Refer to PC Programming on page
Operation
PCPro
1. Obtain the firmware package file from NEC.
2. Open and login to PCPro.
3. Connect to the system.
4. Under the Communications menu, choose the Firmware Update option. (SL1000)
5. Under the Home Menu -> Maintenance Zone, choose the Upgrade SW option. (SL1100)
6. In the Firmware Update Type Window, Select the Firmware Update From PCPro and Click OK.
7. In the firmware update window, browse to the location of the Firmware Package file. For example,
the file name might be 'MainSWv0.36.pkg'.
8. Select the schedule type :
• Immediately after upload
• At the time ...
- If you choose At the time..., select the date and time you want the CPU Unit to reset and
switch over to the new software version.
9. Click Run (Start). PCPro uploads the firmware package file, and updates the system at the time
you specified in step 6.
1-582
1-554.
ISSUE 2.0
Remote (System) Upgrade