NEC SL1000 Features And Specifications Manual page 69

ISSUE 2.0
Guide to Feature Programming
Program
Number
25-06-01 Next Attendant message number
11-10-20 VRS-Record / Erase message
20-17-01 Operator's Extension number
22-02-01 Incoming Service Type Setup
25-02-01 DID/DISA VRS Message
Operation
Set up Built-in Auto-Answering and Simple Voice Mail
< Program>
PRG 22-02-01: 1 (VRS)
PRG 25-02-01: Talkie type: 1 (VRS), Additional data: Message No. 1
PRG 25-06-01: Message No.1: 106 (record to VRS) Received dial 1
To record VRS prompt message 1
1. Press Speaker key +Dial 716+7+001 at terminal
2. After Beep tone, record your message.
3. Press Speaker key and finish recording.
Incoming call and record calling party message
1. Incoming call to specified trunk
2. Calling party is connected to built-in VRS, and hears auto-answering message 1.
3. Calling party dials 1.
4. Calling party records the message (max 2 minutes) after beep tone.
5. Finish the recording.
6. Then following notification will be indicated at operator Multiline Terminal LCD.
VOICE MESSAGE
xx MESSAGES
To retrieve recorded message
1. Press Speaker key + dial 716 + 5 + message number (091~100) at terminal.
2. Recorded message is played.
To delete recorded message
1. Press Speaker key +dial 716 + 3 + message number (091~100) at terminal.
2. Recorded message is deleted.
Features and Specifications Manual
Program Name
xx indicates number of recorded messages
(01 10)
SL1000/SL1100
Default Note
0
716
No setting
0
1
B
1-59