Code Restriction, Dial Block/Toll Restriction, Dial Block - NEC SL1000 Features And Specifications Manual

ISSUE 2.0
Code Restriction, Dial Block/Toll Restriction,
Description
Code Restriction, Dial Block/Toll Restriction, Dial Block lets a user temporarily block dialing on an
extension. This helps a user block his or her phone from being used by another person while they are
away from their desk. A user would need to enter a 4-digit personal code to enable/disable this
feature.
Dial Block can also be set by the supervisor's access code. If Dial Block is set by an extension user,
the supervisor cannot release it. Additionally, if Dial Block is set by the supervisor's code, the
extension user cannot release it.
Important: This function works by password and Class of Service control (the supervisor is not an
assigned extension). If Dial Block is available for all Classes of Service, everyone may become a
supervisor if they know the Dial Block password.
Conditions
• If the system is reset by a first initialize, the Dial Block feature is cleared.
• This feature is not available for ISDN S-Bus extensions.
• Both PRG 21-09-01 (Code Restrict Class) and PRG 21-10 (Dial Block Restriction Class per
Extension) can be set at the same time. However the system gives priority to the setting in PRG
21-10.
• Dial Block can temporarily block an extension Code Restriction setting by changing to a predefined
table that has more restrictions.
Default Settings
Disabled
System Availability
Terminals
None
Required Component(s)
None
Related Features
None
Features and Specifications Manual
SL1000/SL1100
Dial Block
1-153
C