NEC SL1000 Features And Specifications Manual page 556

SL1000/SL1100
• One Touch keys programmed for Park Hold Service Code cannot be used to park calls without
using Hold or Transfer.
• Call Park - Step Call is supported in the local system only.
• A parked call cannot be retrieved from Hold Dial Tone (Second dial tone).
• When a call is parked from a virtual extension, the virtual extension is released.
• When parking a call from a virtual extension, PRG 15-02-21 and PRG 15-18-01 must be set to 1.
• Park Group assignment is by the terminal extension, not the virtual extension.
• When a call parked from a virtual extension recalls, it will ring the terminal the virtual extension is
programmed on, not the virtual extension key.
Default Settings
P
Enabled
System Availability
Terminals
All Terminals
Required Component(s)
None
Related Features
Call Arrival (CAR) Keys
Caller ID
Direct Station Selection (DSS) Console
Hold
Programmable Function Keys
Guide to Feature Programming
Program Number
11-12-31
11-12-32
11-12-35
11-16-11
15-02-08
15-07-01
1-546
Program Name
Service Code Setup (for Service Access) - Park Hold #6
Service Code Setup (for Service Access) - Answer
for Park Hold
Service Code Setup (for Service Access) - Station
Park Hold
Single Digit Service Code Setup - Station Park Hold
Multiline Telephone Basic Data Setup - Automatic
Handsfree
Programmable Function Keys
ISSUE 2.0
Default
*6
773
not assigned
1
Refer to Programming Manual.
Park