Caller Id Call Return - NEC SL1000 Features And Specifications Manual

SL1000/SL1100
Description
The Caller ID Call Return feature allows the voice mail system to use Caller ID information captured
with the message to call and connect the person that left the message with the voice mail user that is
checking messages.
Conditions
C
• A caller using a telephone without Softkeys, calling from outside the system, or from a remote
system is prompted to hear Caller ID information and return a call.
• Return Call is available for subscriber messages and public messages.
• Return Call is accessible to a subscriber during and after message playback.
• Return Call is available for new and old messages.
• Return Call is accessible to a subscriber using Softkeys in Softkey mode or using DTMF in voice
conversation Mode.
• When a subscriber listens to a message from a Softkey equipped telephone, and Caller ID
information is unavailable, the voice mail system leaves the second line of the LCD blank. When
Caller ID is disabled on the system, voice mail displays the message count.
• Voice mail continues to display Caller ID on the LCD while the post-message playback menu is still
displayed on a telephone equipped with Softkeys.
• Live Record is not available when using Return Call.
• To use this feature for long distance calls, ARS must be programmed for the voice mail ports set to
dial out. Refer to the SL1000/SL1100 Programming Manual for detailed programming instructions.
• Use PRG 14-01-22 Caller ID to Voice Mail to enable or disable on a per trunk basis the ability to
send the Caller ID digits to voice mail.
• After the call is ended by either party, the voice mail user is disconnected.
Default Settings
None
System Availability
Terminals
All Multiline Terminals
Required Component(s)
InMail
Related Features
InMail
1-98

Caller ID Call Return

ISSUE 2.0
Caller ID Call Return