Table 2-5 Function Key Codes By Number - NEC SL1000 Features And Specifications Manual

Hide thumbs Also See for SL1000:
Table of Contents

Advertisement

SL1000/SL1100
To program a key, press Speaker key, dial 851 (for 3-digit code) or 852 (for 2-digit codes), press the key
For this
Use this key...
feature...
Step Call
Code: 36
Operation: Press key
Transfer
Code: 06
Operation: Establish call
+ Hold + Ext + Press key
Trunk
Code:
Group
Operation: Press key
Routing
Trunk
Code:
*
02 + TRK group
Groups
(1~9 or 001~126 (SL1000)
001~096 (SL1100) )
Operation: Press key
Trunk
Code: 35
Queuing
Operation: Hear busy
tone for Trk + Press key
Voice Mail
Code: 83 + code (0~4)
Operation: Press key
Code: 77 + extension or
Message Center number
Operation: Press key
+ pswd
(0000) + place outside call
Code: 78 + 0
Operation: Set up call +
Press key
Voice Over
Code: 48
Operation: Hear Off-Hook
Signaling tone + Press key
Function Key Codes by Number
To program a key, press Speaker key, dial 851 (for 2-digit codes) or 852 (for 3-digit codes), press the key
Use this key...
For this feature...
Code: 01 + dest.
Direct Station Selec-
ext. or outside tel
tion, Hotline, One-
# + Hold
Touch Calling
Operation: Press
key
Code: 02
Microphone Cutoff
Operation: Set up
call + Press key
Code: 03
Do Not Disturb
Operation: Press
key
Code: 04
Background Music
Operation: Press
key
Code: 05
Headset Operation
Operation: Press
key
2-18
and enter the code (e.g., 48 for Voice Over).
When you ...
Step through a de-
partment group.
Transfer a call.
*
05
Access a trunk using
Trunk Group Routing.
Use a trunk group key
to access a Trunk
Group.
Camp On or Queue
for a trunk.
Use Voice Mail Serv-
ice.
Call Voice Mail or
leave a message.
Use Voice Mail Re-
cord.
Initiate or respond to
Voice Over.

Table 2-5 Function Key Codes by Number

and enter the code (e.g., 48 for Voice Over).
When you ...
Call an extension or
outside number us-
ing a DSS key.
Use Microphone
Cutoff.
Activate DND.
Turn BGM on or off. On red when activated
Enable or disable
Headset Operation.
Key Lamp Status
Also See Srvc
None
None
On red when active
On red when active
On red while camped
on
Flashes slowly when
monitoring
Flashes green on
your key for your
messages or flashes
red for the Message
Center
Slow Flash red when
active
On red when re-
sponding Hold Flash
red when listening
Key Lamp Status
Also see Srvc
Off = extension idle
On = extension busy
Flashing = DND
On red when activated
On red when activated
On red when activated
ISSUE 2.0
Note
Code
4
-
9
804
-
-
*
8
5
-
6
(SL1100)
Note
Code
847
-
-
825
-
Codes Tables

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sl1100

Table of Contents