Illuminated Dial Pad; Figure 1-19 Light Sensor - NEC SL1000 Features And Specifications Manual

Hide thumbs Also See for SL1000:

Table of Contents

(This Feature is available for SL1000 who is using IP4WW-24TIXH-C-TEL) (SL1000)

Illuminated Dial Pad let the IP4WW-24TIXH-C-TEL (SL1000) IP4WW-[ ]TXH-B-TEL and

IP4WW-24TIXH-C-TEL (SL1100) to illuminate their Dial Pad. Dial Pad can be illuminated in two ways.

• When the phone received call or made called.

• When the phone are set to illuminated automatically.

• In PRG 15-02-66 user can adjust the brightness of Dial Pad to 8 different levels.

• In PRG 15-02-46 user can set interval for the backlight to be on.

• In PRG 15-02-61 user can set Max brightness.

• In PRG 15-02-62 user can set Min brightness.

• In IP4WW-24TIXH-C-TEL, IP4WW-24TXH-B-TEL (SL1100), IP4WW-12TXH-B-TEL (SL1100) it is

equipped with Light Sensor. This sensor can set brightness up to 13 levels. If the sensor detects the

light it can turn on/off the illumination automatically. At PRG 15-02-65 if it the brightness is below the

number it will illuminate the terminal and if it is above the setting it will turn off the illumination. If

PRG 15-02-65 is set to 0 it will work by the setting done at PRG 15-02-64. In this case PRG

15-02-61 will control the brightness when to turn on and PRG 15-02-64 will control the brightness

when to turn off.

• PRG 15-02-64 will be set automatically when the System started.

It will set the setting each time system is started. If you move the phone after System is started it may not

work properly.

• If you are operating illumination automatically (PRG 15-02-63: 1) it will not illuminated when you

receive call or touching the Dial Pad like you do when automatically setting is OFF.

• After time set at PRG 15-02-46 LCD will fade but Dial Pad will not fade but will turn off immediately.

Features and Specifications Manual

Illuminated Dial Pad

SL1000/SL1100

Light Sensor