Softkeys - NEC SL1000 Features And Specifications Manual

ISSUE 2.0
(This Feature is available for SL1000 who is using IP4WW-24TIXH-C-TEL) (SL1000)
Description
Each display telephone provides interactive softkeys for intuitive feature access. It is no longer
necessary to remember feature codes to access the telephone advanced features because the
function of the softkeys change as the user processes calls.
Additional options allow you to fine tune the Multiline Terminal volume levels for handset receive and
transmit, speaker volume, ringer and handset volume, and headset volume levels. You can also
customize the point at which the built-in speakerphone switches from transmit to receive; a boon for
noisy environments. The display telephones also have a contrast control for the LCD display.
Soft Key mode (DSX) is set at PRG 15–02–60 : Mode2 and can be entered by depressing Center key
when the terminal is idle. Refer Navigation key feature section.
Conditions
• If a feature is restricted by an extension Class of Service, though the Softkey menu still displays the
option, the user cannot set the feature.
• The feature must be active to change the volume (e.g., telephone must be ringing, page being
heard, etc.).
Default Settings
Display shows time/date/extension/Softkey menu information.
System Availability
Terminals
IP4WW-24TIXH-C-TEL
IP4WW-24TXH-B-TEL and IP4WW-12TXH-B-TEL (SL1100)
Required Component(s)
None
Related Features
Directory Dialing
Volume Controls
Features and Specifications Manual
SL1000/SL1100

Softkeys

1-651
S