Power Supply - Swann AMI Phosphate-II Operator's Manual

AMI Phosphate-II
Installation
3.4.2
Installation
requirements
22

Power Supply

WARNING
Electrical shock hazard
Installation and maintenance of electrical parts must be per-
formed by professionals. Always turn off power before manipulat-
ing electric parts.
A
B
C
D
A Power supply connector
B
Neutral conductor, Terminal 2
C Phase conductor, Terminal 1
D
Protective earth PE
Note: The protective earth wire (Ground) has to be connected to
the grounding terminal.
The installation must meet the following requirements.
 Mains cable to comply with standards IEC 60227 or IEC
60245; flammable rating FV1
 Mains equipped with an external switch or circuit-breaker
– near the instrument
– easily accessible to the operator
– marked as interrupter for AMI Phosphate-II
A-96.250.641 / 290121