Mounting Of Instrument Panel - Swann AMI Phosphate-II Operator's Manual

AMI Phosphate-II
Installation
3.2.
Mounting
requirements
A-96.250.641 / 290121

Mounting of Instrument Panel

The first part of this chapter describes the preparing and placing of
the system for use.
 The instrument must only be installed by trained personnel.
 Mount the instrument in vertical position.
 For ease of operation mount it so that the display is at eye
level.
 For the installation a kit containing the following installation ma-
terial is available:
– 6 Screws 6x60 mm
– 6 Dowels
– 6 Washers 6.4/12 mm
For dimensions see picture  14.
The instrument is only intended for indoor installation.
17