Establish Sample Flow - Swann AMI Phosphate-II Operator's Manual

AMI Phosphate-II
Instrument Setup
4.1.
30

Establish Sample Flow

Level
1 Turn on the sample flow.
2 Open the flow regulating valve (D).
3 Adjust the sample flow to about 10 l/h.
4 Check tubing and flow cell for leaks and repair if necessary.
WARNING
Health hazard
the sample which in the photometer contains Hexammonium
heptamolybdate 4-hydrate.
 At no means recirculate it into the water system.
A Cover
A
B
Outer tube
C Flow cell block
B
D
Flow regulating valve
E Filter
F Filter vessel
C
D
E
F
A-96.250.641 / 290121