Software Structure - Swann AMI Phosphate-II Operator's Manual

AMI Phosphate-II
Operation
5.3.
Main Menu
Messages
Diagnostics
Maintenance
Operation
Installation
Messages
Pending Errors
Maintenance List
Message List
Diagnostics
Identification
Sensors
Sample
I/O State
Interface
Maintenance
Calibration
Service
Simulation
Set Time
Cleaning
Operation
Sensors
Relay Contacts
Logger
Installation
Sensors
Signal Outputs
Relay Contacts
Miscellaneous
Interface
34

Software Structure

1
Menu 1: Messages
1.1
Reveals pending errors as well as an event history
(time and state of events that have occurred at an ear-
lier point of time) and maintenance requests.
It contains user relevant data.
Menu 2: Diagnostics
2.1
Provides user relevant instrument and sample data.
Menu 3: Maintenance
3.1
For instrument calibration, service, relay and signal
output simulation and to set the instrument time.
It is used by the service personnel.
01.01.05 16:30:00
Menu 4: Operation
4.1
Subset of menu 5 - installation, but process-related.
User relevant parameters that might need to be modi-
fied during daily routine. Normally password protected
and used by the process-operator.
Menu 5: Installation
5.1
For initial instrument set up by SWAN authorized per-
sons, to set all instrument parameters. Can be pro-
tected by means of a password.
A-96.250.641 / 290121