Hart Interface; Usb Interface - Swann AMI Phosphate-II Operator's Manual

AMI Phosphate-II
Installation
3.8.3
3.8.4
28

HART Interface

Terminals 38 (+) and 37 (-).
The HART interface PCB allows for communication via the HART
protocol. For detailed information, consult the HART manual.
HART Interface PCB

USB Interface

The USB Interface is used to store Logger data and for Firmware up-
load. For detailed information see the corresponding installation in-
struction.
The optional third signal output 0/4 – 20 mA PCB [B] can be plugged
onto the USB interface and used in parallel.
USB Interface
A USB interface PCB
B Third signal output 0/4 - 20 mA PCB
A
B
A-96.250.641 / 290121