Grab Sample - Swann AMI Phosphate-II Operator's Manual

AMI Phosphate-II
Operation
5.5
36

Grab Sample

Navigate to menu 4.1 <Operation/Grab Sample> and follow the dia-
log on the Display.
Relay status during <Grab Sample>:
 Signal outputs are on hold
 All limits are switched off
Grab Sample
- Close Sample Tap
Prepare 1 liter of Sample
Wait for next prompt
Grab Sample
- Fill flow cell with
Sample
<Enter> to continue
Grab Sample
Wait till measuring is
completed
Progress
Grab Sample
Measuring completed
Wait till flow cell is
empty
Wait for next prompt
Grab Sample
Operation completed
Open sample tap
Grab Sample 0,3 ppm
<Enter> to continue
1 Navigate to menu <Operation>.
4.1.5
2 Press [Enter].
3 Follow the dialog on the Display.
4.1.5
4.1.5
4.1.5
4 Press [Enter], to terminate the grab
4.1.5
sample measurement.
Note: The measuring value of the
grab sample will not be stored!
A-96.250.641 / 290121