Set Retry Time Maximum; Set Hold Down Time - 3Com CoreBuilder 7000 Operation Manual

182 C 7: LAN E
HAPTER
Set Retry Time
Maximum

Set Hold Down Time

V 1.0
MULATION ERSIONS AND
Command Actions
Enter menu sequence:
Enter a parameter at the prompt
Parameter
initial retry time
Direct access sequence:
Command Result
System action taken:
System message display:
Sets the MPC-p5 retry time maximum parameter.
Command Actions
Enter menu sequence:
Enter a parameter at the prompt
Parameter
retry time maximum
Direct access sequence:
Command Result
System action taken:
System message display:
Sets the MPS-p6 hold down time parameter.
2.0
(2) LEM: LAN Emulation
(5) MPA: MPOA Devices Configuration
(2) MPC: MPOA Client Configuration
(5) MP4: Set initial retry time
Format or Range
1 - 300 (seconds)
2 5 2 5
The initial retry time parameter is set.
Parameter changed successfully
(2) LEM: LAN Emulation
(5) MPA: MPOA Devices Configuration
(2) MPC: MPOA Client Configuration
(6) MP5: Set retry time maximum
Format or Range
10 - 300 (seconds)
2 5 2 6
The retry time maximum parameter is set.
Parameter changed successfully