Lan Emulation Redundancy - 3Com CoreBuilder 7000 Operation Manual

LAN Emulation
Redundancy
This section describes the concepts and planning of redundant LAN
Emulation services and is relevant to networks that have more than one
CoreBuilder 7000 family ATM switch installed.
The following topics are included:


LANE Services in the CoreBuilder 7000 Family ATM Switch Card


Redundant LANE Services


LECS Redundancy Facility - Configuring the LECS-Order Database


LES Redundancy Facility - Configuring the ELAN Topology Database


Selecting LAN Emulation Redundancy Mode


LANE Redundancy Start-up Delay


LANE Redundancy Limitations


LANE Redundancy Planning
The LANE redundancy management system of version 4.0 described in
this section is intended to supersede the LANE redundancy system of
previous versions which was based on the external Transcend Enterprise
Manager application.
See the CoreBuilder 7000 Family ATM Switches Installation and Startup
Guide for a description of how to install switch cards with LANE
redundancy.
The LANE redundancy facility of the CoreBuilder 7000 has the following
advantages:


It is handled internally by the LECS and does not depend on an
external management tool such as the Transcend Enterprise Manager


No change in the functionality of the LAN Emulation Clients is
required — works with any standard LEC of any vendor


Handles recovery from ELAN splitting


The version 4.0 mechanism can be disabled to revert to the previous
method of managing LAN redundancy by the Transcend Enterprise
Manager

LAN Emulation Redundancy

153