FIGURE 4: VOLVO D13 ENGINE DATA PLATE
FIGURE 5: ALLISON TRANSMISSION
FIGURE 6: MERITOR DRIVE AXLE
FIGURE 7: INDEPENDENT FRONT SUSPENSION
SAFETY CERTIFICATION
Vehicle components meet specifications and
standards as follows:
DOT CERTIFICATION PLATE
This certifies that vehicles manufactured by
Prevost comply with all Federal Motor Vehicle
Safety Standards at the time of manufacture.
Information such as the date of manufacture,
model year, gross vehicle weight rating, tire types
and inflation pressure is also etched on this plate.
The DOT certification plate is affixed behind the
driver's seat.
FIGURE 8: DOT CERTIFICATION PLATE
EPA ENGINE LABEL
The emissions certification label affixed in the
engine compartment certifies that the engine
conforms to federal and any state exhaust
emissions regulations.
PA-1619 Owner's Manual H3-45 VIP
Technical Information 9-15
Material and parts conform to ASTM and/or
l
SAE standards in effect at the time of
manufacture.
All factory- installed interior materials meet
l
FMVSS 302 for fire resistance.
Certified according to Provincial, State and
l
Federal Safety standards (Canadian and US)
BMCSS, FMVSS and CMVSS.
Other applicable certification labels are
l
affixed to the component.