Control Switches; L.h. Dashboard Panel - PREVOST H3-45 VIP Owner's Manual

CONTROL SWITCHES

High quality switches are used to control many of
the features of the vehicle. Many switches have
an embedded indicator LED to inform the driver at
a glance which features are active.
On some switches, the indicator LED will turn off
after a short while when the engine is running. This
is normal and is designed to reduce glare when
driving. The functions still operate even if the LED
is off. If the switches are still on when the engine
is turned off, the LEDs will illuminate to warn the
driver to turn them off. Switches are described in
the order they appear, from left to right, top to
bottom.

L.H. DASHBOARD PANEL

The L.H. dashboard panel includes controls for the
operation of the coach; it also includes the ignition
switch and an adjustable air register.
FIGURE 22: L.H. DASHBOARD PANEL
Headlights And Exterior Lighting
OFF position – Daytime running
lights only (with engine running).
Press this rocker switch to turn on the
following lights:
First position – Front parking lights,
taillights, clearance lights, marker
lights, license plate light.
Second position (push down fully) – the
headlights, the controls and instrument
lights and all lights from the first position.
NOTE
Daytime running lights will be automatically
canceled when the exterior lighting switch is
fully depressed (second position).
Fog Lights (Optional)
NOTE
Some states and provinces restrict the use of
fog lights. Verify local state or provincial
regulations before using.
Hazard Warning Flashers
Upper Windshield Wipers (Optional)
To avoid damaging the wiper blades or scratching
the windshield, do not operate the wipers when the
windshield is dry. Also, loosen frozen wipers
before operating.
PA-1619 Owner's Manual H3-45 VIP
Controls and Instruments 4-21
Optional halogen fog lights provide
better visibility in fog and precipitation.
They improve close range visibility and
provide added safety.
Press the rocker switch to make all
turn signal lights flash at once. The
dashboard telltale lights will flash
when the hazard warning flashers are
ON.
Once the hazard warning flashers are
activated, the ignition switch can be
turned to the OFF position. The
hazard warning flashers will stay
activated and will prevent the vehicle
systems to fall in "sleep mode".
Press the rocker switch to the first
position to activate the upper wipers
intermittently.
Press to the second position for
continuous operation of the upper
wipers.
CAUTION