PREVOST H3-45 VIP Owner's Manual page 180

7-6 Safety Features and Equipment
Set Target Pressures
l
This menu allows the end user to fine-tune the
target pressure setting, taking account for the
specific operating conditions
operation or unloaded operation). The end user can
readjust the target pressure within +30% and -20%
of the factory set target pressure but not outside
this range.
The factory set target pressure is always kept in
permanent memory into the TPMS display and
cannot be edited by the end user.
When the user sets a new target value, the
selection can't be made outside the valid range.
Alarm Settings
l
(cold weather
PA-1619 Owner's Manual H3-45 VIP
When selecting the Alarm Settings Menu, a
submenu containing
Temperature Alarm appears.
When selecting Pressure, the following pressure
alarm screen appears. A similar screen is
displayed for temperature settings. The cursor can
be moved to highlight the data beside "new value"
and the "accept / exit" option. +/- allows increasing
or decreasing the "new value" data. Pressure
alarm changes are made by steps of 1 PSI, in the
range from 5 to 20 PSI. Temperature alarm is done
by steps of 5°F (2°C) in the range from 150 °F to
180 °F (64 °C to 82 °C). Pressing OK with "accept"
highlighted applies changes and exits to the
previous menu, while pressing OK while the "exit"
option is highlighted exits without changes.
Display Settings
l
Pressure Alarm and