Sliding Windows - PREVOST H3-45 VIP Owner's Manual

Hide thumbs Also See for H3-45 VIP:
Table of Contents

Advertisement

3-6 Coach Interior
NOTE
The awning window electrical circuit is equipped
with a thermistor protecting the components from
overheating. If the awning window is opened and
closed repeatedly, causing overheating of the
components, the thermal protection will interrupt
the operation of the window for a short while to
permit cooling down of the components. This
feature also prevents personal injuries and
damages
to the components
obstructs the window movement.

SLIDING WINDOWS

To open or close an electrically-operated sliding
window, use the rocker switch button located on
the wall, next to the window.
CAUTION
Never try to open or close the sliding window by
pulling or pushing directly on the window; this
could damage the opening mechanism gearbox.
NOTE
If
the sliding window
inoperative, the power sliding window can be
manually closed by removing the lateral plastic
trim located on the R. H. side of the window to
access the drive belt. Manually move the drive belt
to close the window.
FIGURE 11: SLIDING WINDOW
if
something
electrical
circuit
is
PA-1619 Owner's Manual H3-45 VIP
NOTE
The sliding window electrical circuit is equipped
with a thermistor protecting the components from
overheating. If the sliding window is opened and
closed repeatedly, causing overheating of the
components, the thermal protection will interrupt
the operation of the window for a short while to
permit cooling down of the components. This
feature also prevents personal injuries and
damages
to the components
obstructs the window movement.
if
something

Advertisement

Table of Contents
loading

Table of Contents