Safety Certification; Dot Certification Plate; Vehicle Identification Number (Vin) - PREVOST X3-45 COACH 2018 Operator's Manual

9-12 Technical Information
I-BEAM FRONT AXLE
INDEPENDENT FRONT SUSPENSION

SAFETY CERTIFICATION


Vehicle components meet specifications and
standards as follows:

Material and parts conform to ASTM and/or
SAE standards in effect at the time of
manufacture.

All factory-installed interior materials meet
FMVSS 302 for fire resistance.

Certified according to Provincial, State and
Federal Safety standards (Canadian and
US) BMCSS, FMVSS and CMVSS.

Other applicable certification labels are
affixed to the component.

DOT CERTIFICATION PLATE

This certifies that vehicles manufactured by
Prevost. comply with all Federal Motor Vehicle
Safety Standards at the time of manufacture.
Information such as date of manufacture, model
year, gross vehicle weight rating, tire types and
inflation pressure is also etched on this plate.
The DOT Certification plate is affixed to L.H.
control panel.
00008
DOT CERTIFICATION PLATE
VEHICLE IDENTIFICATION NUMBER
(VIN)
16136
VEHICLE IDENTIFICATION NUMBER
The Vehicle Identification Number is stamped on
a plate located on the windshield frame pillar
(driver's side). The VIN is visible from the
outside of the vehicle. Make sure the correct
vehicle identification number is given when
ordering replacement parts. Using the VIN when
ordering parts will facilitate processing.
NOTE
Record the VIN in the vehicle documentation
and keep with company records. The VIN will
normally be used for vehicle registration,
service reference needs and for obtaining
vehicle insurance coverage.
PA1627 X3-45 Operator's Manual
00016
00044