PREVOST H3-45 VIP Owner's Manual page 160

5-38 Other Features
request a diagnostic using the dashboard Driver's
Info Display (DID). Check if there are active errors
in the slide- out electrical system. With the
DIAGNOSTICS menu, highlight VIEW ACTIVE
FAULTS and then highlight ELECTRICAL
SYSTEM to request a diagnostic of the electrical
system from the MCM.
Press the enter key. If applicable, the DID shows
the device ID, the fault messages or fault codes
recorded. When more than one fault is recorded,
an arrow pointing down appears on the right of the
display. Use the down arrow to see all the fault
messages.
Once the problem is corrected, the DID will still
shows the fault as being active. Leave VIEW
ACTIVE FAULTS up to the main menu. Then
return to DIAGNOSTICS, VIEW ACTIVE
FAULTS, and then ELECTRICAL SYSTEM. The
DID should not display any faults.
PA-1619 Owner's Manual H3-45 VIP