Controls - PREVOST H3-45 VIP Owner's Manual

C-10 Allison Transmission Other Features
DIAGNOSTIC TROUBLESHOOTING CODES (DTC) LIST - ALLISON 5

CONTROLS

DTC
C13
Retarder Request Sensor Failed Low
12
C13
Retarder Request Sensor Failed High
13
P01
Pedal Position Sensor Circuit Low Voltage
22
P01
Pedal Position Sensor Circuit High Voltage
23
P02
Transmission Fluid Over Temperature
18
P05
System Voltage Low
62
P06
TCM Not Programmed
02
P06
Control module random access memory (RAM)
04
P06
Torque Control Data Mismatch ECM/TCM
14
P06
TCM Internal Temperature Too High
34
P06
Sensor Reference Voltage "A" Circuit Low
42
P06
Sensor Reference Voltage "A" Circuit High
43
P06
Actuator Supply Circuit Voltage 1 Open (HSD 1)
57
P06
Actuator Supply Voltage 1 (HSD1) Low
58
P06
Actuator Supply Voltage 1 (HSD1) High
59
P07
Brake Switch Circuit Malfunction
03
Description
PA-1619 Owner's Manual H3-45 VIP
TH
GENERATION
CHE
Inhibited Operation
CK
Description
Light
May inhibit retarder operation
No
if not using J1939 datalink
May inhibit retarder operation
No
if not using J1939 datalink
Use default throttle values.
No
Freezes shift adapts.
Use default throttle values.
No
Freezes shift adapts.
Yes Use default sump temp
No Inhibit TCC Operation, DNA
Yes Lock in Neutral
Yes Lock in Neutral
Allows operation
Yes
reverse and second range.
Yes SOL OFF (hydraulic default)
Yes Default sensor data used
Yes Default sensor data used
SOL OFF, DNA, Inhibit TCC
Yes operation,
modulation
DNS, SOL OFF (hydraulic
Yes
default)
DNS, SOL OFF (hydraulic
Yes
default)
No Neutral to Drive shifts for
refuse packer. TCM inhibits
No
retarder operation if a TPS
code is also active.
only in
Inhibit main