PREVOST H3-45 VIP Owner's Manual page 199

Using The Test Mode:
First, test the functionality of the commands
related to the exterior lighting:
Activate the right directional signal and check
l
that the corresponding cluster telltale light
illuminates.
Activate the left directional signal and check
l
that the corresponding cluster telltale light
illuminates.
Activate the hazard warning flashers and
l
check that the corresponding cluster telltale
lights illuminate.
Press the headlights rocker switch in first
l
position and confirm that the instrument panel
illuminates.
Press the headlights rocker switch in second
l
position and confirm that the headlights
illuminate.
Turn on the high beams and check that the
l
corresponding cluster telltale light illuminates.
Press on the brake pedal and check that the
l
STOP telletal light illuminates
Once these commands tested, activate the test
mode to check the exterior lighting.
Go to the front of the vehicle and check the lights:
Left and right directional signals.
l
Identification lights and clearance lights.
l
Low beams.
l
High beams.
l
Left side and right side of the vehicle:
Directional signals.
l
Marker lights.
l
Rear of the vehicle:
Directional signals.
l
Identification lights and clearance lights.
l
Stoplights and tail lights.
l
Back-up light.
l
Center High mounted Stop Light (CHSL)
l
PA-1619 Owner's Manual H3-45 VIP
Care and Maintenance 8-15