FIGURE 3: ALLISON TRANSMISSION
FIGURE 4: ZF A-132 DRIVE AXLE
FIGURE 5: I-BEAM FRONT AXLE
SAFETY CERTIFICATION
Vehicle components meet specifications and
standards as follows:
Material and parts conform to ASTM and/or
l
SAE standards in effect at the time of
manufacture.
All factory- installed interior materials meet
l
FMVSS 302 for fire resistance.
DOB 1300-1556
Certified according to Provincial, State and
l
Federal Safety standards (Canadian and
US) BMCSS, FMVSS and CMVSS.
Other applicable certification labels are
l
affixed to the component.
DOT CERTIFICATION PLATE
This certifies that vehicles manufactured by
Prevost comply with all Federal Motor Vehicle
Safety Standards at the time of manufacture.
Information such as the date of manufacture,
model year, gross vehicle weight rating, tire types
and inflation pressure is also etched on this plate.
The DOT Certification plate is affixed to L.H.
control panel.
FIGURE 6: DOT CERTIFICATION PLATE
EPA ENGINE LABEL
The emissions certification label affixed in the
engine compartment certifies that the engine
conforms to federal and any state exhaust
emissions regulations.
FIGURE 7: EPA CERTIFICATION LABEL
PA-1639 Operator's Manual 2020 X3-45 Commuter
Technical Information 9-11