Operation Panel; Parts Of The Operation Panel - Mitsubishi Electric FR-E700 Series Instruction Manual

Operation
4.3

Operation panel

4.3.1

Parts of the operation panel

Fig. 4-6:
The number of digits displayed on the operation panel is four. Only the upper four digits of values
can be displayed and set. If the values to be displayed have five digits or more including decimal
places, the fifth or later numerals can not be displayed nor set.
When 50Hz is set, 50.00 is displayed. When 120Hz is set, 120.0 is displayed and second decimal
place is not displayed nor set.
FR-E700SC EC
Operation panel of the FR-E700SC
Operation panel
LED-Display
4-digit 7-segment display for operational
values, parameter numbers, etc.
Unit indication
LED to indicate the current unit
Hz: Frequency
A: Current
Off: Voltage
Flicker: Set frequency
Rotation direction indication
Lit or flicker during inverter operation
RUN is lit: Forward rotation
RUN flickering slowly: Reverse rotation
RUN flickering fast: Start command is
given but the frequency command is
missing
Monitor indication
Lit to indicate the monitoring mode.
Parameter setting mode
Lit to indicate the parameter setting
mode.
Operation mode indication
LED to indicate the operation mode
PU operation mode (PU)
External operation mode (EXT)
(lit at power-ON at initial setting.)
Network operation mode (NET)
Combined operation mode
(PU and EXT)
These turn OFF when command source is
not on operation panel (Refer to section
6.18.3).
I001732E
4 - 7