Operation Panel Frequency Setting/Key Lock Operation Selection (Pr. 161) - Mitsubishi Electric FR-E700 Series Instruction Manual

Setting for the parameter unit, operation panel
6.22.3

Operation panel frequency setting/key lock operation selection (Pr. 161)

The setting dial of the operation panel can be used like a potentiometer to perform operation. The key
operation of the operation panel can be disabled.
Pr. No. Name
Frequency setting/key lock
161
operation selection
The above parameter can be set when Pr. 160 "User group read selection" = 0.
NOTES
You can find a detailed description of the operation panel with examples in section 4.3 "Operation
Panel".
When the setting dial and key operation is made invalid, "HOLD" appears on the operation panel
while pressing a key.
The STOP/RESET key is valid even in the operation lock status.
6 - 314
Setting
Initial Value Description
Range
Setting dial
0 frequency setting
mode
Setting dial
1 potentiometer
mode
0
Setting dial
10 frequency setting
mode
Setting dial
11 potentiometer
mode
Parameters referred to
Key lock mode invalid
Key lock mode valid
These setting must be con-
firmed by pressing the MODE
key for about 2s.
Parameter
Refer to
Section
—