Usb Communication (Pr. 547, Pr. 548) - Mitsubishi Electric FR-E700 Series Instruction Manual

Communication operation and setting
6.19.6

USB communication (Pr. 547, Pr. 548)

Inverter setup can be easily performed using the FR Configurator by connecting the inverter and per-
sonal computer with a USB cable. A personal computer and inverter can be easily connected with one
USB cable.
Pr. No. Name
USB communication station
547
number
USB communication check
548
time interval
Changed setting value is made valid when powering on or resetting the inverter.
Specification
Interface
Transmission speed
Wiring Length
Connector
Power supply
Tab. 6-105: USB communication specifications
Fig. 6-132: Connection to the USB connector
You can perform parameter setting and monitoring with the FR Configurator. Refer to the instruction
manual of the FR Configurator for details.
6 - 276
Initial Value Setting Range Description
0 0–31 Inverter station number specification
USB communication is possible
0
Trips in the PU operation mode (E.USB)
Sets the interval of communication check time. If a
no-communication state persists for longer than
9999
0.1–999.8s
the permissible time, the inverter will come to trip
(E.USB).
9999 No communication check
USB cable
How to open the USB connector cover
Pull the cover in the direction of arrow.
Description
Conforms to USB1.1
12Mbps
5m
USB mini B connector (receptacle mini B type)
Self-power supply
USB connector
Parameter
Parameters referred to
551 PU mode operation
command source selection
Then turn it upward.
Refer to
Section
6.18.3
I001921E