Operation Selection At Power Failure; Automatic Restart - Mitsubishi Electric FR-E700 Series Instruction Manual

Parameter
6.12

Operation selection at power failure

Purpose
At instantaneous power failure occur-
rence, restart inverter without stop-
ping motor.
When under voltage or a power failure
occurs, the inverter can be deceler-
ated to a stop.
6.12.1

Automatic restart

(Pr. 30, Pr. 57, Pr. 58, Pr. 96, Pr. 162, Pr. 165, Pr. 298, Pr. 299, Pr. 611)
You can restart the inverter without stopping the motor in the following cases:
● When power comes back on after an instantaneous power failure
● When motor is coasting at start.
FR-E700SC EC
Parameters that must be set
Automatic restart operation after instanta-
neous power failure/flying start
Power failure-time deceleration-to-stop
function
Operation selection at power failure
Refer to
Section
Pr. 30, Pr. 57, 6.12.1
Pr. 58, Pr. Pr. 96,
Pr. 162, Pr. 165,
Pr. 298, Pr. 299,
Pr. 611
Pr. 261 6.12.2
6 - 151