Komatsu PC500LC-10R Shop Manual page 580

METHOD FOR STARTING UP KOMTRAX TERMINAL
2)
On "KOMTRAX Settings" screen, select "Terminal Sta-
tus" with the function switches or numeral input
switches.
3)
On "Terminal Status" screen, check the state of "KOM-
TRAX Communication Inspection".
If "KOMTRAX Communication Not Open" is displayed
on the state of "KOMTRAX Communication Inspec-
tion", Perform step 2. If "Already Open" is displayed,
KOMTRAX Communication Inspection is not needed.
2.
KOMTRAX Communication Inspection
Observe the following when performing KOMTRAX Com-
munication Inspection.
1)
On "Service Menu" screen, select "KOMTRAX Set-
tings" with function switches or numeral input
switches.
2)
On "KOMTRAX Settings" screen, select "GPS & Com-
munication State" with the function switches or numer-
al input switches.
30-174
30 TESTING AND ADJUSTING
PC500LC-10R