Komatsu PC500LC-10R Shop Manual page 533

30 TESTING AND ADJUSTING
6.
To change the setting of the working mode, travel speed,
or auto-deceleration during monitoring, operate the corre-
sponding switch under the current condition, and the corre-
sponding mode is selected.
REMARK
• The new setting which has been changed during moni-
toring is held even after the screen returns to the nor-
mal screen after monitoring is finished.
• When the working mode is changed to B ("Breaker
Mode "), the screen to confirm the change of the set-
ting is displayed as in changing the working mode on
the standard screen.
7.
A selected monitoring item can be saved or deleted by us-
ing function switches.
F1: Saves the monitoring item.
F2: Clears the monitoring item.
• When a monitoring item is saved, a confirmation
screen appears asking whether the saved item should
be displayed or not when "Self-define Monitoring" is
selected again.
• When an item is saved, it can be displayed any num-
ber of times unless it is cleared.
• If another item is saved with the previous item having
been saved, the latest item does overwrite the previ-
ous item.
TABLE OF SELF-DEFINE MONITORING
Monitor- Self-define Monitoring items (screen dis-
ing code
01002 Engine Speed
04107 Coolant Temperature
PC500LC-10R
play)
SET AND OPERATE MACHINE MONITOR
Unit (Default: SI
SI Metric Imperial
r/min rpm
°C °C
Applicable
compo- Remarks
nent
rpm ENG
°F ENG
30-127