30 TESTING AND ADJUSTING
3)
After "GPS & Communication State" screen is dis-
played, press the numerical switches in order while
pressing 4 as 4 + 1 → 2 → 3.
4)
After "Are you sure you want to inspect?" is displayed,
execute the inspection with the function switch.
F5: Returns the screen to "GPS & Communication
State" screen
F6: Executes KOMTRAX Communication Inspection.
5)
The screen displays the state of KOMTRAX Commu-
nication inspection. Check on this screen that all item
are "OK".
"Modem": "OK" is displayed when communication area
is confirmed.
"GPS": "OK" is displayed when it acquires GPS data.
"Transmission": "OK" is displayed when it transmits
data correctly.
"Inspection State": When all items of "Modem", "GPS",
and "Transmission" are "OK", "OK" is displayed on
"Inspection State".
•
It takes 90 seconds to 15 minutes for all items to be "OK".
•
While waiting for all items to be "OK", operation such as turning the starting switch to OFF position
or starting the engine will not be a problem.
If there is nothing abnormal, KOMTRAX Communication Inspection finishes automatically. Select
"KOMTRAX Settings" → "Terminal Status" of "Service Menu" to make sure that "Already Open" is
indicated for the item in "KOMTRAX Communication Inspection".
•
KOMTRAX Communication Inspection may not be completed when the machine is placed indoor
where radio wave from the satellite is blocked.
PC500LC-10R
METHOD FOR STARTING UP KOMTRAX TERMINAL
30-175