Komatsu PC500LC-10R Shop Manual page 542

SET AND OPERATE MACHINE MONITOR
1)
Switch operation (press other switches in order while
pressing 4): 4 + 1 → 2 → 3
2)
Check that the display on the screen becomes the
clear mode, then clear the individual information one
by one or all together by using the function switches.
REMARK
The screen is in delete mode if "CLEAR" is displayed
above F2.
F2: Executes the deletion of all the abnormality re-
cords.
F3: Moves the selection downward.
F4: Moves the selection upward.
F5: The screen returns to "Abnormality Record" screen
F6: Executes the deletion of the selected abnormality records.
REMARK
• To delete a selected abnormality record, select the abnormality record with F3 or F4, and then
press F6 to execute the deletion of abnormality record.
• To clear all abnormality records together, press F2, and then all the records are deleted regardless
of the selected item.
• If "E" is displayed on the left of a failure code, the clearing operation is received but the information
is not cleared.
3)
On "Electrical Systems Abnormality Record Reset" screen, operate the function switches to delete all
the records.
F5: The screen returns to "Electrical Sys Abnormality Record" (Delete mode)
F6: Executes the deletion
REMARK
• This is the screen when a selected abnormality re-
cord is going to be deleted.
30-136
30 TESTING AND ADJUSTING
PC500LC-10R