Komatsu PC500LC-10R Shop Manual page 556

SET AND OPERATE MACHINE MONITOR
3.
Select the setting of time with the function switches on
"Auto Idle Stop Time Fixing" screen.
Flexible: Selection from OFF to 60 minutes is available.
OFF: Auto Idle Stop function is not used.
x-minute fixing: OFF or, longer time than the selected time
is not available.
F3: Moves the selection downward.
F4: Moves the selection upward.
F5: Cancels the settings inputted before they are entered.
The screen returns to the "Default" screen
F6: Selection is entered. The screen returns to "Default" screen.
REMARK
When this setting is "OFF", Auto Idle Stop does not operate. "Auto Idle Stop Time Setting" in the operator
mode is disabled.
METHOD FOR SETTING WITH DEFAULT SETTING MENU (WITH/WITHOUT Eco
mode Easy Setting)
Default setting menu is used to check or change default values of the machine monitor and the machine.
For setting WITH/WITHOUT Eco mode Easy Setting, refer to this section.
1.
Select "Default" on "Service Menu" screen.
REMARK
See "METHOD FOR OPERATING SERVICE MODE" in
"SERVICE MODE" for selecting method.
2.
Select "Option" with the function switches or numeral input
switches on "Default" screen.
REMARK
See "METHOD FOR OPERATING SERVICE MODE" in
"SERVICE MODE" for selecting method.
3.
Select "With/Without Eco mode Easy Setting" on "Option"
screen with function switches or numeral input switches.
30-150
30 TESTING AND ADJUSTING
PC500LC-10R