Komatsu PC500LC-10R Shop Manual page 151

10 STRUCTURE AND FUNCTION
SERVICE MODE FUNCTION OF MACHINE MONITOR
These functions are not displayed normally. These are for a technician to display and set with special switch
operation. These functions are used for special settings, testing, adjusting, or troubleshooting.
Items available in the service mode are as follows.
REMARK
For operating method of the service mode functions, see TESTING AND ADJUSTING, "SERVICE MODE".
Pre-defined Monitoring
Self-define Monitoring
Abnormality Record
Maintenance Record
Maintenance Mode Setting
Phone Number Entry
Default
Diagnostic Tests
Adjustment
No-Injection Cranking
KOMTRAX Settings
Service Message
REARVIEW CAMERA
(Machine with rearview camera)
PC500LC-10R
Mechanical Sys Abnormality Record
Electrical Sys Abnormality Record
Key-on mode
Unit
With/Without Attachment
Camera
Auto Idle Stop Time Fixing
KomVision With/Without
Cylinder Cutout Mode Operation
Reset Number of Abrupt Engine Stop by AIS
Pump Absorption Torque (F)
Pump Absorption Torque (R)
Travel Lo Speed Setting
Att Flow Adjust in Combined Ope
Fan Speed Mode Select
KomVision Adjustment
Terminal Status
GPS & Communication State
Modem Information
COMPONENT PARTS OF CONTROL SYSTEM
10-57