Komatsu PC500LC-10R Shop Manual page 585

30 TESTING AND ADJUSTING
1.
Insert a flat-head screwdriver or the like into the hole (3) of
cover (2) and push the inside tooth (B) to remove the cov-
er.
2.
Remove the bolts (4) (2 places).
3.
Remove the cover (1).
REMARK
• Shim (6) may be inserted in the cover mounting bolts to
adjust the clearance in the rim of the cover. When re-
moving the cover (1), record the places and quantities
of the shims. When installing the cover, insert the
shims according to the record.
• Take care of shim (6), since it comes off together with
cover (1).
4.
Loosen the camera mounting bolts (5) (3 places) and ad-
just the camera mounting angle (A) so that the corner (D)
of mounting bracket (C) is aligned with the horizontal line
(E).
5.
After adjusting, tighten the bolts (5).
PC500LC-10R
ADJUST REARVIEW CAMERA ANGLE
30-179