Komatsu PC500LC-10R Shop Manual page 526

SET AND OPERATE MACHINE MONITOR
1.
Press the numerical switches 1 → 2 → 3 in order with 4
being pressed while the standard screen is displayed.
REMARK
This switching operation is available only when the stand-
ard screen is displayed.
2.
"Service Menu" screen is displayed, then it means that the
service mode is selected. Select an item on the service
menu with the function switches or numeral input switches.
F3: Moves the selection downward.
F4: Moves the selection upward.
F5: The screen returns to the standard screen. (operator
mode).
F6: Enters the selected item.
REMARK
• When you input a code (2-digit) by using the numeral
input switches, the corresponding menu is directly se-
lected. You may enter the selected item with F6.
• Items with 2-digit codes are the menus displayed on
"Service Menu" screen. The items on the right are the
menus on the next hierarchy.
The following are the items selectable on "Service Menu" (including some items which need special switching
operations).
Items selectable in the service menu
Code
01 Pre-defined Monitoring
02 Self-define Monitoring
Abnormality
03
Record
04 Maintenance Record
30-120
Item
Mechanical Sys Abnormali-
ty Record
Electrical Sys Abnormality
Record
METHOD FOR CHECKING PRE-DEFINED MONITORING
INFORMATION
METHOD FOR CHECKING SELF-DEFINE MONITORING
INFORMATION
METHOD FOR CONFIRMING ABNORMALITY RECORD
(MECHANICAL SYSTEMS)
METHOD FOR CONFIRMING ABNORMALITY RECORD
(ELECTRICAL SYSTEMS)
METHOD FOR CONFIRMING MAINTENANCE RECORD
30 TESTING AND ADJUSTING
Reference
PC500LC-10R