Komatsu PC500LC-10R Shop Manual page 150

COMPONENT PARTS OF CONTROL SYSTEM
Category
(*1)
Selection of auto-deceleration
Selection of working mode
Selection of travel speed
Operation of stopping the alarm buzzer
Operation of windshield wiper
Operation of window washer
Operation of air conditioner
Operation to display camera mode
B
Operation of clock display and service meter display
Check of maintenance information
User menu setting and display
Energy Saving Guidance
•
• Machine Setting
• Maintenance
• Monitor Setting
• User message (including KOMTRAX messages for user)
ECO Guidance display
C Caution monitor display
Action level and failure code display
Checking function by LCD (liquid crystal display)
D Checking function of service meter
Function of usage limitation and changing password
*1: The operator mode items are categorized as follows.
A: Display which is displayed from the time when the starting switch is turned to "ON" position to the time when
display changes to the standard screen, and display which is displayed after starting switch is turned to "OFF"
position
B: Display when the machine monitor switch is operated
C: Display when conditions are satisfied
D: Display that requires special operations of switches
*2: The sequence of display varies with the settings and state of the machine. It shows the sequence from the
time when the starting switch is turned to "ON" position to the time when the standard screen appears.
V: When engine start lock is enabled
W: When engine start lock is disabled
X: When working mode at start is set to "Breaker mode (B)"
Y: When an abnormality is detected by the check before starting
Z: When any item is detected as the maintenance due time is over
REMARK
• For how to operate the operator mode functions, see Operation and Maintenance Manual.
• For the operating method of the engine start lock function, see Password setting and canceling manual.
10-56
Item
10 STRUCTURE AND FUNCTION
Display order (*2)
V W X
PC500LC-10R
Y Z