Komatsu PC500LC-10R Shop Manual page 563

30 TESTING AND ADJUSTING
Low Speed function is used to finely adjust the travel speed at the low speed.
1.
Select "Adjustment" on "Service Menu" screen.
REMARK
For selecting method, see "METHOD FOR OPERATING
SERVICE MODE" in "SERVICE MODE".
2.
On the "Adjustment" screen, select "Travel Low Speed"
with function switches or numeral input switches.
REMARK
For selecting method, see "METHOD FOR OPERATING
SERVICE MODE" in "SERVICE MODE".
3.
On "Travel Low Speed" screen, change the value on the
right side by using the function switches.
See the table for the Low speed value.
F3: Set value decreases.
F4: Set value increases.
F6: The setting is checked and entered. The screen re-
turns to "Adjustment" screen.
REMARK
The 3-digit number in the left column does not change.
This is the code for this function.
Relation between the set value and travel Low speed value
Code
020
METHOD FOR ADJUSTING (Attachment Flow Adjustment)
Use the adjustment menu to check the various settings of the machine or to adjust the value.
The Attachment Flow Adjustment function is a function that finely adjusts the flow rate supplied to the attach-
ment flow in the combined operation.
PC500LC-10R
SET AND OPERATE MACHINE MONITOR
Set value
000
001
002
003
Travel Low speed value
3.0 km/h
2.8 km/h
3.2 km/h
3.4 km/h
30-157