Komatsu PC500LC-10R Shop Manual page 551

30 TESTING AND ADJUSTING
3.
Select the mode to be set with the function switches on
"Key-on Mode" screen.
F3: Moves the selection downward.
F4: Moves the selection upward.
F5: Selection is canceled. The screen returns to "Default"
screen.
F6: Selection is entered. The screen returns to "Default"
screen.
"Power Mode": monitor displays "P" when the starting
switch is turned to ON position.
"Economy Mode": monitor displays "E" when the starting
switch is turned to ON position.
"Lifting Mode": Monitor displays "L" when the starting switch is turned to ON position.
"Breaker Mode": monitor displays "B" when the starting switch is turned to ON position.
"Attachment-P Mode": monitor displays "ATT/P" when the starting switch is turned to ON position.
"Attachment-E Mode": monitor displays "ATT/E" when the starting switch is turned to ON position.
"Mode at Previous Key-off": monitor displays the mode which used from the previous operation when the
starting switch is turned to ON position.
REMARK
• Default value at shipment is in "Mode at Previous Key-off".
• If "With Attachment" is not selected, "Attachment-P Mode" and "Attachment-E Mode" are unavailable.
• If you change the setting to "Without attachment" when "Attachment/P-mode" or "Attachment/E-mode" is
selected, P (Power mode) is displayed when the starting switch is turned to ON position.
• If the engine is stopped during operator mode when "Breaker Mode" is selected, the monitor displays
"Breaker Mode" ("B") regardless of the above setting.
METHOD FOR SETTING DEFAULT (UNIT)
Default setting menu is used to check or change default values of the machine monitor and the machine.
"Unit" function is used to select units of data displayed for monitoring, etc.
1.
Select "Default" on "Service Menu" screen.
REMARK
See "METHOD FOR OPERATING SERVICE MODE" in
"SERVICE MODE" for selecting method.
2.
Select "Unit" with the function switches or numeral input
switches on "Default" screen.
REMARK
See "METHOD FOR OPERATING SERVICE MODE" in
"SERVICE MODE" for selecting method.
PC500LC-10R
SET AND OPERATE MACHINE MONITOR
30-145