Komatsu PC500LC-10R Shop Manual page 546

SET AND OPERATE MACHINE MONITOR
Code
41 Fuel PreFilter Change Interval
01 Engine Oil Change Interval
02 Engine Oil Filter Change Interval
05 Hydraulic Oil Tank Breather Change Interval
03 Fuel Main Filter Change Interval
04 Hydraulic Oil Filter Change Interval
07 Damper Case Oil Check or Refilling Interval
09 Swing Machinery Case Oil Change Interval
08 Final Drive Case Oil Change Interval
60 Coolant Change Interval
81 Coolant Filter Change Interval
82 Radiator Cap Change Interval
10 Hydraulic Oil Change Interval
99 All Default Value
3.
Select "Maintenance Mode Change". Perform setting with
the function switches on the appeared screen.
To use: Functions of all maintenance items are enabled in
operator mode.
Not to use: Functions of all maintenance items are disa-
bled in operator mode.
F3: Moves the selection downward.
F4: Moves the selection upward.
F5: Selection is canceled. The screen returns to "Mainte-
nance Mode Change" screen.
F6: Selection is entered. The screen returns to Mainte-
nance Mode Change screen.
REMARK
Even if ON/OFF of each item has been set, if the above setting is changed, it overrides the individual set-
ting.
30-140
30 TESTING AND ADJUSTING
Item
PC500LC-10R