Xilinx Virtex-7 VC7222 User Manual page 15

The GTH transceiver power rails also have corresponding inputs on the GTH transceiver
power terminal block J72 as shown in
from a bench-top power source. J72 is shown in
X-Ref Target - Figure 1-7
Information about the 7 series GTH power supply modules included with the VC7222
Characterization Kit is available from the vendor websites
7 Series GTZ Transceiver Power Module
The 7 series GTZ transceiver power module (callout 26,
MGTZVCCL and MGTZVCCH voltages to the FPGA GTZ transceivers. Two 7 series GTZ
power modules from third-party vendors are provided with the VC7222 board for
evaluation, Texas Instruments PMP6577 and Bellnix BPE-37. Either of the two GTZ
modules can be plugged into connectors J5 and J71 in the outlined and labeled power
module location shown in
VC7222 Transceiver Characterization Board
UG965 (v1.4) February 11, 2015
Figure 1-7: GTH Transceiver Power Terminal Block J72
Caution!
The 7 series GTH module MUST be removed when providing external power to the
GTH transceiver rails.
Figure
www.xilinx.com
Figure 1-7 to supply each voltage independently
Figure 1-2 as callout 23.
UG965_c1_07_121912
[Ref
Figure
1-8.
Detailed Description
3].
1-2) supplies MGTZAVCC,
15
Send Feedback