Fault Repair; On/Off Button Jams; Display Steams Up - Miele G 1 Series Technical Information

G 1xxx/G 2xxx
3

Fault Repair

3.1

On/Off Button Jams

Symptom:
In machines with plastic panels, the On/Off button can get stuck.
Cause:
Cutout in panel for switch is too narrow.
Remedy:
Cutout was modified in machines 79249108 and later.
In older machines, use an appropriate tool to widen the cutout.
3.2

Display Steams Up

Symptom:
Inside of the display steams up during drying.
Cause:
Condensation conduit with open capillary barrier (mat. no. 5829110).
Remedy:
Replace the conduit.
Note:
Since August 2005, machines have been fitted with condensation conduits
featuring closed capillary barriers (mat. no. 6208972).
221
Technical Information