Mppw Circulation Pump (With Frequency Converter & Slide Shutter); Figure 050-9: Mppw Circulation Pump - Miele G 1 Series Technical Information

Hide thumbs Also See for G 1 Series:
Table of Contents

Advertisement

G 1xxx/G 2xxx
By monitoring the speed in this way and thus controlling additional water
intake precisely can reduce energy and water consumption. The potential
savings are approximately 15 percent water and 19 percent energy.
Note:
This system has an additional advantage. Good wash results are also
ensured if the dishwasher load includes items with less than ideal shape
(e.g., deep cups) as the controlled additional water intake will replace the
water that may be trapped in such pieces. This similarly applies if, e.g., a
light plastic bowl should be turned over and filled inadvertently by the
stream of water.
2.11
MPPW Circulation Pump (with Frequency Converter & Slide Shutter)
Circulation pump MPPW is fitted with a frequency converter and a slide shutter.

Figure 050-9: MPPW Circulation Pump

For connection plug voltages, see Figure 050-10.
1 Heater pressure switch, B1/13
2 Slide shutter position, B3/12, and motor, M24
3 Pump housing, frequency converter electronic
4 Middle spray arm inlet
5 Top spray arm inlet
6 Heater, R1
7 Retaining lugs for pump housing cap
8 Retaining screws for pump housing cap
9 Bottom spray arm inlet
89
Technical Information

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the G 1 Series and is the answer not in the manual?

Questions and answers

ELI STAHL
April 13, 2025

INTAKE AND DRIAN COMES ON ALL THE TIME NEED TO READ WHAT THE CODES ARE FOR THIS UNIT G2141

1 comments:
Mr. Anderson
April 13, 2025

For the Miele G 1 Series dishwasher model G2141, when the "Intake/Drain" light is on continuously, it typically indicates a fault condition. Based on the context, error codes like F01 or other FXX codes may be shown on the display, and the "Intake/Drain" LED may flash or stay on. Specific error codes are not directly listed for G2141 alone, but models like G2120 and G214x share similar fault indications:

- The “Intake/Drain” LED may flash.
- The time display may show FXX (e.g., F01).
- LEDs like “Wash/Rinse,” “Drying,” and “End” may flash together.

These symptoms generally suggest a fault related to water intake or drainage, such as a blocked filter, kinked hose, or faulty pump.

This answer is automatically generated

Table of Contents

Save PDF