1. Manuals
  2. Brands
  3. Miele Manuals
  4. Dishwasher
  5. G 1 Series
  6. Manual

Miele G 1 Series Manual

Hide thumbs Also See for G 1 Series:
Table of Contents

Advertisement

Quick Links

Download this manual
PROGRAMMING MODE
G 1xxx and G 2xxx Dishwashers
(All US Models)
© 2010 Miele USA

Advertisement

Table of Contents
loading

Related Manuals for Miele G 1 Series

Summary of Contents for Miele G 1 Series

  • Page 1 PROGRAMMING MODE G 1xxx and G 2xxx Dishwashers (All US Models) © 2010 Miele USA...

  • Page 2: Table Of Contents

    G 1xxx/G 2xxx Technical Information Table of Contents 1   Customer Programming ................... 3   2   Service Programming ....................4   2.1   Inspira and Advanta - G 118x/G 2170/G 218x ............4   2.2   Optima - G 1202 ......................8   2.3  ...

  • Page 3: Customer Programming

    G 1xxx/G 2xxx Technical Information Customer Programming The customer programming mode includes certain parts of the service programming mode. All programming options can be carried out in service programming mode (see Section 2). Close the appliance door and switch off the power before accessing customer programming mode.

  • Page 4: Service Programming

    G 1xxx/G 2xxx Technical Information Model Access Procedure Available Options 1. Press and hold Start/Stop button. Water hardness G 2142/G 2143/G 2120/ 2. Switch on appliance and wait G 2140/G 2150 approx. 4 sec. for "Start/Stop" LED Rinse aid (See Sections 2.7 and 2.8 for to light up.
  • Page 5 G 1xxx/G 2xxx Technical Information Options: Function Programming Display Press the Program button 1x. To reset all parameters The "Intake/Drain" LED flashes 1x to standard settings, press rapidly. "SaniWash" LED is off: Reset and hold the Program values do not correspond to button until the standard settings;...
  • Page 6 G 1xxx/G 2xxx Technical Information Function Programming Display Press the Program button The "Intake/Drain" LED flashes 2x 20x. To make the desired slowly. "SaniWash" LED is off: setting, press and hold the standard setting; "SaniWash" LED Adjusting the main wash Program button until the flashes: increased wash temperature...

  • Page 7: Table 2: Service Programming Mode Summary, G 118X/G 2170/G 218X

    G 1xxx/G 2xxx Technical Information Function Programming Display Press the Program button 38x. To make the desired The "Intake/Drain" LED flashes 3x setting, press and hold the slowly and 8x rapidly. "SaniWash" Model setting Program button until the LED off: Models without drying fan; "Intake/Drain"...

  • Page 8: Optima - G 1202

    G 1xxx/G 2xxx Technical Information Rinse Aid Volume [mL] Flash Pattern of "SaniWash" LED — 1x rapidly 2x rapidly 3x rapidly 4x rapidly 5x rapidly 6x rapidly Table 4: Rinse Aid Quantities, G 118x/G 2170/G 218x One milliliter equals 0.3 fluid ounces. Standard setting.
  • Page 9 G 1xxx/G 2xxx Technical Information Function Programming Display Press the Delay Start The "Rinse" LED is out or flashes. button 2x. The "Delay The display shows p and the digit/s Start" LED flashes 2x of the set value alternately. rapidly intermittently. Water hardness setting Press the Start/Stop Setting range: p1 to p70;...
  • Page 10 G 1xxx/G 2xxx Technical Information Function Programming Display The "Rinse" LED is off or flashes. Press the Delay Start The display shows p and a digit button 23x. The "Delay alternately: p0 = Normal water Start" LED flashes 2x quantity (standard setting); p1 = Water quantity slowly and 3x rapidly Increased water quantity.

  • Page 11: Table 5: Service Programming Mode, G 1202

    G 1xxx/G 2xxx Technical Information Function Programming Display Press the Delay Start button 36x. The "Delay The "Rinse" LED is off or flashes. Start" LED flashes 3x The display shows p and a digit slowly and 6x rapidly alternately. Setting options: Appliance height setting intermittently.

  • Page 12: Optima - G 1262

    G 1xxx/G 2xxx Technical Information Water Hardness [°d] Water Hardness [gpg] Display … … … 38.5 37 – 50 39.6 – 53.5 51 – 60 54.6 – 64.2 61 – 70 65.3 – 74.9 Table 6: Water Hardness Settings, G 1202 Rinse Aid Volume [mL] Display Table 7: Rinse Aid Settings, G 1202...
  • Page 13 G 1xxx/G 2xxx Technical Information Options: Function Programming Display The display shows the software Do not press the Tab version ID no. in consecutive digits Software version ID check button. The "Tab" LED is not lit. (e.g., -1304). This programmable function can be used to reset all modifiable Press the Tab button 1x.
  • Page 14 G 1xxx/G 2xxx Technical Information Function Programming Display The display shows p and a digit alternately. Setting options: p0 = Press the Tab button 20x. Standard setting; p1 = Wash The "Tab" LED flashes 2x Adjusting the main wash temperature increased. If this option slowly.

  • Page 15: Table 8: Service Programming Mode, G 1262

    G 1xxx/G 2xxx Technical Information Function Programming Display Press the Tab button 35x. The "Tab" LED flashes 3x The display shows p and a digit slowly and 5x rapidly Appliance width setting intermittently. Press the alternately. Setting options: p0 = Program button as 24”...

  • Page 16: Optima - G 1470/G 2470

    G 1xxx/G 2xxx Technical Information Water Hardness [°d] Water Hardness [gpg] Display … … … 38.5 37 – 50 39.6 – 53.5 51 – 60 54.6 – 64.2 61 – 70 65.3 – 74.9 Table 9: Water Hardness Settings, G 1262 Rinse Aid Volume [mL] Display Table 10: Rinse Aid Settings, G 1262...
  • Page 17 G 1xxx/G 2xxx Technical Information Options: Note: In models with software version ID –769, wait for the decimal point in the display to switch off before pressing the GEL button. Function Programming Display Do not press the GEL The display shows the software Software version ID check button.
  • Page 18 G 1xxx/G 2xxx Technical Information Function Programming Display This programmable function can be Press the GEL button 12x. used to reset all customer-modified The “GEL” LED flashes parameters back to their standard Resetting standard settings. The display shows P and a once slowly and 2x quickly digit alternately.

  • Page 19: Table 11: Service Programming Mode, G 1470/G 2470

    G 1xxx/G 2xxx Technical Information Function Programming Display Press the GEL button 26x. The “GEL” LED flashes 2x The display shows p and a digit slowly and 6x quickly Second interim rinse (ID alternately. Setting options: p0 = intermittently. Press the Standard setting;...

  • Page 20: Optima - G 1472/G 2472

    G 1xxx/G 2xxx Technical Information Water Hardness [°d] Water Hardness [gpg] Display … … … 38.5 37 – 50 39.6 – 53.5 51 – 60 54.6 – 64.2 61 – 70 65.3 – 74.9 Table 12: Water Hardness Settings, G 1470/G 2470 Note: If the dishwasher is connected to an external ion exchanger water softener (i.e.
  • Page 21 G 1xxx/G 2xxx Technical Information Function Programming Display Press the options button The display shows p and the digit/s 2x. The “Tab” LED flashes of the set value alternately. p0 = Softener sensor activation/ 2x quickly intermittently. Softener sensor active. Hardness Water hardness setting Press the Program button setting range: p1 to p70;...
  • Page 22 G 1xxx/G 2xxx Technical Information Function Programming Display The display shows p and a digit Press the options button 22x. The “Tab” LED alternately. Setting options: p0 = Program running time flashes 2x slowly and 2x Standard setting; p1 = Program reduction quickly intermittently.

  • Page 23: Advanta - G 2020

    G 1xxx/G 2xxx Technical Information Function Programming Display Press the options button The display shows p and a digit 39x. The “Tab” LED alternately. The following countries flashes 3x slowly and 9x can be set: p1 = EUR (Europe); p2 = Country setting quickly intermittently.
  • Page 24 G 1xxx/G 2xxx Technical Information 3. Release the Start/Stop button. 4. Immediately press the Start/Stop button 5 times; on the 5th time, hold until the "Start/Stop" LED flashes. 5. Release the Start/Stop button. 6. If the "Start/Stop" LED does not light up, repeat the procedure. Acknowledgement indicator: The "Start/Stop"...

  • Page 25: Table 15: Service Programming Mode Summary, G 2020

    G 1xxx/G 2xxx Technical Information Function Programming Display "Rinse" LED is off = program Press the Start/Stop running time per factory setting; button 3x.Turn the selector "Rinse" LED flashes = shortened Shortening program switch to 6 o'clock. To program running time. Program- sequence change the setting, press dependent shortcut due to a...

  • Page 26: Inspira And Diamante - G 2120/G 2140/G 2150

    G 1xxx/G 2xxx Technical Information Flash Pattern of "Rinse" Water Hardness [°d] Water Hardness [gpg] 1 – 4 1.1 – 4.3 1x rapidly 5 – 7 5.4 – 7.5 2x rapidly 8 – 11 8.6 – 11.8 3x rapidly 12 – 15 12.8 –...
  • Page 27 G 1xxx/G 2xxx Technical Information Options: Function Programming Display The "Rinse & Hold" LED flashes 1x Press the Program rapidly. "Rinse" LED is off: Values button 1x. Press the Reset do not correspond to standard Start/Stop button to settings; "Rinse" LED flashes: reset all standard Values correspond to standard settings.

  • Page 28: Table 18: Service Programming Mode Summary, G 2120/G 2140/G 2150

    G 1xxx/G 2xxx Technical Information Function Programming Display The "Rinse & Hold" LED flashes Press the Program 2x slowly and 7x rapidly. "Rinse" button 27x. Press the LED is off: Standard setting; "Rinse" Activating/deactivating Start/Stop button as LED flashes: Improved drying – improved drying appropriate to make the depending on the program, drying...

  • Page 29: Inspira And Diamante - G 2142/G 2143

    G 1xxx/G 2xxx Technical Information Rinse Aid Volume [mL] Flash Pattern of "Rinse" LED — 1x rapidly 2x rapidly 3x rapidly 4x rapidly 5x rapidly 6x rapidly Table 20: Rinse Aid Quantities, G 2120/G 2140/G 2150 One milliliter equals 0.3 fluid ounces. Standard setting.
  • Page 30 G 1xxx/G 2xxx Technical Information Function Programming Display Press the Program (or The "Rinse & Hold" LED flashes 3x Delay Start for G 2143) rapidly. If the "Rinse" LED flashes Dispensed rinse aid button 3x. Press the 3x rapidly, this corresponds to quantity setting Start/Stop button as standard setting of 0.1 fl.oz.

  • Page 31: Table 21: Service Programming Mode Summary, G 2142/G 2143

    G 1xxx/G 2xxx Technical Information Function Programming Display Press the Program (or The "Rinse & Hold" LED flashes 3x Delay Start for G 2143) slowly and 6x rapidly. "Rinse" LED button 36x. Press the Appliance height setting is off: Standard appliance height (G Start/Stop button as 1xxx);...

  • Page 32: Optima - G 2420/G 243X

    G 1xxx/G 2xxx Technical Information Rinse Aid Volume [mL] Flash Pattern of "Rinse" LED — 1x rapidly 2x rapidly 3x rapidly 4x rapidly 5x rapidly 6x rapidly Table 23: Rinse Aid Quantities, G 2142/G 2143 One milliliter equals 30 fluid ounces. Standard setting.
  • Page 33 G 1xxx/G 2xxx Technical Information Function Programming Display Press the Delay Start The "Rinse" LED is out or flashes. button 2x. The “Delay The display shows p and the digit/s Start” LED flashes 2x Softener sensor activation/ of the set value alternately. p0 = quickly intermittently.
  • Page 34 G 1xxx/G 2xxx Technical Information Function Programming Display The "Rinse" LED is out or flashes. Press the Delay Start The display shows p and a digit button 21x. The “Delay alternately. Setting options: p0 = Start” LED flashes 2x Standard setting; p1 = Wash Final rinse temperature slowly and once quickly modification (ID nos.

  • Page 35: Table 24: Service Programming Mode, G 2420/G 243X

    G 1xxx/G 2xxx Technical Information Function Programming Display Press the Delay Start button 27x. The “Delay The "Rinse" LED is off or flashes. Start” LED flashes 2x The display shows p and a digit slowly and 7x quickly alternately. Setting options: p0 = Extended drying time intermittently.

  • Page 36: Excella - G 2630/G 2670

    G 1xxx/G 2xxx Technical Information Water Hardness [°d] Water Hardness [gpg] Display … … … 38.5 37 – 50 39.6 – 53.5 51 – 60 54.6 – 64.2 61 – 70 65.3 – 74.9 Table 25: Water Hardness Settings, G 2420/G 243x Note: If the dishwasher is connected to an external ion exchanger water softener (i.e.
  • Page 37 G 1xxx/G 2xxx Technical Information Function Programming Display Select Reset. To restore Reset the standard settings, The display reads Reset factory select OK. To return to the default settings? main menu, press Back. The display lists the languages that Select Language. can be selected.
  • Page 38 G 1xxx/G 2xxx Technical Information Function Programming Display This function is activated in the Select Save extras. standard settings. In the display, Save extras Select a setting and this is signaled with the message confirm with OK. On. If you do not wish to save, select Off.

  • Page 39: Excella - G 2732

    G 1xxx/G 2xxx Technical Information Function Programming Display Select 2nd interim rinse. Second interim rinse Select a setting and Options: On, Off (standard setting). confirm with OK. Select Machine height. Options: Normal (G 1xxx), Machine height setting Select a setting and XXL (G 2xxx).
  • Page 40 G 1xxx/G 2xxx Technical Information Options: Function Programming Display Select Reset. To restore the Reset standard settings, select OK. The display reads Reset standard To return to the main menu, settings? press Back. The display lists the languages that Select Language. can be selected.
  • Page 41 G 1xxx/G 2xxx Technical Information Function Programming Display This function is deactivated as Select System lock. Select Activating/deactivating standard. This is indicated in the a setting and confirm with display by Off. If the function is the system lock desired, select On. Setting the temperature Select Temperature.

  • Page 42: Laperla - G 283X/G 2872

    G 1xxx/G 2xxx Technical Information Function Programming Display Select 2nd interim rinse. Second interim rinse Select a setting; confirm with Options: On, Off (standard setting). SC (with or without Options On, Off. Select SC. Make a selection cutlery tray) - available Programming function not available and confirm with OK.
  • Page 43 G 1xxx/G 2xxx Technical Information Options: Note: Some of the following parameters can also be programmed via the Settings menu. Function Programming Display Select Reset. To restore Reset the standard settings, The display reads Reset standard select OK. To return to the settings? main menu, press Back.
  • Page 44 G 1xxx/G 2xxx Technical Information Function Programming Display Select Change main menu. Select a wash program for position 1, The display shows the programs press Continue, and do available. The order of the first Changing the main menu exactly the same for three can be modified.

  • Page 45: Table 28: Service Programming Mode, G 283X/G 2872

    G 1xxx/G 2xxx Technical Information Function Programming Display Select Factory default. To reset the parameters Resetting standard The display reads Reset to (settings) modified by the settings standard settings? customer to their standard settings, confirm with OK. Select Temperature. Select Main wash or Final Options: Normal and Increased.

  • Page 46: Activating Dealer Demo Mode (Excella/Laperla)

    G 1xxx/G 2xxx Technical Information 2.13 Activating Dealer Demo Mode (Excella/LaPerla) 1. Access the service programming mode. 2. Select Dealer, then OK. The display shows the following options: Demo mode: The program is activated by pressing a button. It runs through once and must then be restarted.

This manual is also suitable for:

G 2 seriesG 2170G 1202G 1262G 2020G 2142 ... Show all

Table of Contents